Shipping throughout Russia and to other countries

Multi-saw machines E'nergoTex POPLAR-200,450, TRIUMPH-300, etc.

The TRIUMPH-300 single-shaft multi-saw machine is a second-row machine and is designed for high-performance longitudinal cutting of two-channel, three-channel and four-channel beams up to 160 mm high, as well as to dissolve a board or shield of unlimited width.

TRIUMPH-300. Technical specifications.

The two-shaft log saw Topol-450 is designed for sawing logs up to 440 mm in diameter to produce a carriage and a beam.
On the Topol-450M machine, it is possible to install up to 2 saws on each motor shaft, to obtain not only a carriage in one pass, but also 2 boards with a thickness of 20 to 90 mm, depending on the size of the spacer.

Poplar-450, Poplar-450M. Technical specifications.
Multi-saw double-shaft disc machines TOPOL 200 are used for sawing 2, 3, 4-edged timber up to 210 thick. 2-shaft technology has advantages over single-shaft. Using saws of smaller diameter, while the thickness of the cut is smaller, respectively, less waste and more output of lumber.

POPLAR 200. Technical characteristics.
The SDM-160 multi–saw machines are designed for longitudinal cutting of 3x, 4x-edged beams of various wood species into bars and boards up to 160 mm thick. The machine works on the principle of pushing the beam, clamped by the feed rollers, on the spindle at distances providing the required thickness of the product.

SDM-160. Technical specifications.
The MIG-1000 multi-saw edging machines are designed for longitudinal sawing of uncut boards and a hump in order to obtain edged lumber (edged boards, slats, bars, three-channel hump). The workpiece is stretched automatically by heavy drive ripples located at the entrance and exit of the machine.

MIG-1000. Technical specifications.
BUK 700 machines are a sheet metal frame on which a drive, saw assembly and feed drive are mounted. The required distance between the circular saws is set by special spacer bushings (spacers). The machine has a two-row claw curtain with upper and lower claw curtains.

BEECH 700. Technical specifications.

Price list

All E'nergoTex products

The group "New Technologies" offers for review the products of the plant E'nergoTex: disc and belt sawmills, thin-gauge machines, multi-saw machines, edge-cutting machines, profiling machines, cylindrical and miter machines, adjustable devices
  • Custom machines E'nergoTex
    Custom machines
    CPA-3, UPC-55, etc.
  • Adjustable devices E'nergoTex
    Adjustable devices
    Altai-3, etc.
  • Grinding machines E'nergoTex
    Grinding machines
    PZL-1, SZA-3M, etc.
  • Miter machines E'nergoTex
    Miter machines
    TS-3, TS-8, TS-1, etc.
  • Cylinder machines E'nergoTex
    Cylinder machines
    OCS-260, CB-240, CBU-320, etc.
  • Profiling machines E'nergoTex
    Profiling machines
    SBP-200, SBA-260, FP-5, etc.
  • Humpback machines E'nergoTex
    Humpback machines
    GRAD-4, GRAD-1, etc.
  • Edging machines E'nergoTex
    Edging machines
    SKR et al .
  • Multi-saw machines E'nergoTex
    Multi-saw machines
    POPLAR-200,450, TRIUMPH-300, etc.
  • Thin gauge machines E'nergoTex
    Thin gauge machines
    SIL-750, SIL-750m, BA-180, etc.
  • Circular sawmills E'nergoTex
    Circular sawmills
    DPA, DPA, PDPU, etc.
  • Band sawmills E'nergoTex
    Band sawmills
    Altai-3, LDA-300, etc.

About E'nergoTex

Energotech Plant (Barnaul) has been a manufacturer and supplier of high-quality woodworking equipment for 17 years. Mass production and extensive experience allow us to supply reliable, trouble-free equipment at reasonable prices. The plant is actively expanding its network of representative offices and dealers in Russia and the near abroad.

  • INNOVATIONS

    Constantly improving production, developing new models of sawmills and upgrading old ones, the plant's specialists strive to meet any requests that the business may make for woodworking equipment.

  • CUSTOMER FOCUS

    The plant constantly cooperates with all its customers, which allows us to quickly respond to any problems, and customers can receive reliable service and detailed information about all new models and modifications of sawmills.

  • AVAILABILITY OF ACCESSORIES

    Own production of woodworking equipment allows the plant to keep in stock any number of spare parts and components for any machine.

Information Board E'nergoTex

Learn more about our products E'nergoTex.
  • Price list for woodworking equipment Energotech поставщика ЭнергоТех
    Price list for woodworking equipment Energotech

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: